| addwfs2run(1) |
addwfs2run – add waveform data from other runs to a run file |
| analysis(1) |
analysis – data analysis, averaging and graphing |
| appendrun(1) |
appendrun – append data from one run file to another |
| asc2run(1) |
asc2run – convert ascii text voltage values to a run file |
| avgspfrq(1) |
avgspfrq – calculate average spike frequencies for last spikes in burst |
| axon2run(1) |
axon2run, atf2run – convert Axon Instruments binary or text files to run files |
| bin2run(1) |
bin2run – convert old bin files to new averaged run files |
| burstareas(1) |
burstareas – calculate area under curve for bursts in run |
| burstbars(1) |
burstbars – convert cycle start and end markers to burst bars in plot |
| calibrate(1) |
calibrate – record calibration information |
| cap(1) |
cap – interactive data capture program |
| cavg(1) |
cavg – combined capture and averaging |
| chanmon(1) |
chanmon – combined capture and averaging |
| convfrm(1) |
convfrm – convert old format run files to new format |
| copyrun(1) |
copyrun, renamerun – copy or rename run files |
| crosscorr(1) |
crosscorr – calculate Pearson’s cross-correlation from time-series data |
| dat2run(1) |
dat2run – convert Cromix AVG files to new averaged run files |
| dsepr(1) |
dsepr, dcap, qcap, dsepavg, dcavg, qcavg – capture data from A/D, separate into frames, and average |
| emuhpgl(1) |
hpgl2exp, hpgl2mcd, xhpgl, hpgl2psc, hpgl2ras, hpgl2xpm, hpgl2svg, replot, dashpens – emulate HPGL for output to other devices |
| fixcal(1) |
fixcal – adjust calibration information in run headers |
| fixdepths(1) |
fixdepths, showdepths – interpolate missing depths for isopotential mapping |
| fixhpsp(1) |
fixhpsp – fix up HP plotter spooler |
| fixprsp(1) |
fixprsp – fix up line printer spooler |
| frmfile(5) |
frmfile – frame file format |
| frmsel(1) |
frmsel – select frames for analysis |
| ftype(1) |
ftype – extended file type command |
| genplot(1) |
genplot, makeplot – generate X-Y plots in HPGL, from files of numbers |
| gensspp(1) |
gensspp – generate a start-stop analysis polar plot file |
| getrundata(1) |
getrundata – get data for experiment database from run files |
| getsplat(1) |
getsplat – extract and merge spike latencies from multiple traces |
| getwfdata(1) |
getwfdata – generate an ASCII dump of waveforms with downsampling |
| gpsras(5) |
gpsras – graphics processing system raster file format |
| hardcopy(1) |
hardcopy – HP 7550A plotter spooler |
| hpgl2gif(1) |
hpgl2gif, hpgl2ppm, hpgl2bmp, hpgl2png, hpgl2tiff, hpgl2pdf, hpgl2cps – convert HPGL plot file to GIF, PPM, BMP, PNG or TIFF image, PDF or colour PostScript file |
| isopot(1) |
isopot – generate isopotential contour maps |
| isoprep(1) |
isoprep, isoparms – prepare captured data for isopotential mapping |
| joinnum(1) |
joinnum – join two-column files of numbers into one file, keyed on first column |
| layout(1) |
layout – HPGL graphic layout editor |
| lsrun(1) |
lsrun, dumprun – list run files and run header contents, or frame contents |
| mannwhitney(1) |
mannwhitney – perform a nonparametric Mann-Whitney test on 2 sets of angular data |
| mergelo(1) |
mergelo – merge layout files |
| neuro(1) |
neuro – data capture and analysis for neurosciences |
| peel(1) |
peel – exponential peel analysis |
| proa2run(1) |
proa2run – convert ProAnalyst export text file to runfile format |
| qm(1) |
qm, qmf – obtain quick measurements from captured data |
| ras2xbm(1) |
ras2xbm – convert gpsras bitmap images to XBM format |
| raster(1) |
raster – pseudo-3D raster graph |
| rawwfplt(1) |
rawwfplt – generate a series of raw waveform plot files |
| salvagerun(1) |
salvagerun – attempt to salvage an incomplete run from an aborted capture |
| sdump(1) |
sdump, sdumpopt – graphics terminal screen dump |
| selectlp(1) |
selectlp – select lp printer device type |
| smr2run(1) |
smr2run – convert Spike2 .smr (SON) format file to a run file |
| spfrqpeel(1) |
spfrqpeel – calculate time constant for spike frequency curve |
| spfrqramps(1) |
spfrqramps – calculate spike frequency and current min/max for current ramps |
| stickfig(1) |
stickfig – generate stick figure from ProAnalyst’s exported limb coordinates |
| trimfrms(1) |
trimfrms – copy run file while trimming each trace in the frames |
| vfconv(1) |
vfconv, vfedit – Hershey font file conversion and editing |
| wf2tr(1) |
wf2tr – convert a runfile with only waveforms to one with traces |
| wf2wav(1) |
wf2wav, wf2mp3, wf2dsp – convert runfile waveform into WAVE or MP3 file or sound output |
| wfampls(1) |
wfampls – export and plot waveform amplitudes for normalized cycles in runs |
| wtsum(1) |
wtsum – weighted sums of traces |
| |
|
| pdfman.zip |
Whole collection of PDF manual pages |
| SCRCHelp.zip |
SCRC Software Help and Manual pages in HTML |
